Adjusting the Tension of the Flip Up Footplate
Chairs built before 12/01/2008
NOTE: For this procedure, refer to
FIGURE 5.7.
NOTE: The tension can be adjusted to increase
or decrease the rotation effort of the flip up
footplates.
1. Loosen the mounting screw on the
footrest angle hinge to decrease the
rotation effort.
NOTE: DO NOT remove the footplate
mounting screw.
2. Tighten the mounting screw on the
footrest angle hinge to increase the
rotation effort.
3. Repeat STEPS 1 and 2 for the other
footplate.
Chairs built after 12/01/2008
NOTE: For this procedure, refer to
FIGURE 5.8.
NOTE: The tension can be adjusted to increase
or decrease the rotation effort of the flip up
footplates.
1. Loosen the mounting screw on the
front rigging angle hinge to decrease
the rotation effort.
NOTE: DO NOT remove the footplate
mounting screw.
2. Tighten the front rigging angle hinge
mounting screw to increase the rotation
effort.
3. Repeat STEPS 1 and 2 for the other
footplate
Part No 1143238
SECTION 5—CENTER MOUNT FOOTRESTS
Center
Mount
Footrest
Footrest
Angle Hinge
Mounting Screw
FIGURE 5.7 Adjusting the Tension of the
Flip Up Footplate -
Chairs built before 12/01/2008
Center Mount
Footrest
Mounting Screw
FIGURE 5.8 Adjusting the Tension of the
Flip Up Footplate -
Chairs built after 12/01/2008
23
Footplate
Footplate
Adjustable ASBA Seat