Invacare Adjustable ASBA Seat Service Manual page 37

Adjusting the Footplate Angle
NOTE: For this procedure, refer to FIGURE 7.4.
1. Loosen, but DO NOT remove, the two flat head screws and the two barrel nuts that
secure the footplate to the footplate clamp (Detail "A").
2. Rotate the footplate clamp on the pivot hinge until the desired angle is achieved
(Detail "B").
3. Securely tighten footplate to footplate clamp and hinge pivot with the two flat head
screws and barrel nuts.
4. Repeat STEPS 1‐3 for opposite side if necessary.
5. For additional angle adjustment, perform the following (Detail "C"):
A. Loosen the set screw.
B. Rotate footplate up or down to desired position.
C. Retighten set screw.
DETAIL "A"
DETAIL "C"
Part No 1143238
Flat Head
Footplate
Screws
Footplate
Clamp
Barrel Nuts
FIGURE 7.4 Adjusting the Footplate Angle
SECTION 7—POWER ELEVATING LEGRESTS
DETAIL "B"
Footplate
Footplate
Clamp
Direction of
Rotation
Set Screw
37
Pivot Hinge
Adjustable ASBA Seat