SECTION 5—CENTER MOUNT FOOTRESTS
Removing/Installing the Manual Center Mount Footrest
NOTE: For this procedure, refer to FIGURE 5.1.
Removing
1. Remove the rigging pivot pin that secures the footrest to the mounting bracket of the
seat frame.
2. Hold the footrest with one hand and engage the release lever with the other while
simultaneously pulling the center mount footrest out of the mounting bracket of the
seat frame.
Installing
1. Engage the release lever with one hand, hold the center mount footrest with the other,
and insert the center mount footrest into the mounting bracket of the seat frame.
2. Reinstall the rigging pivot pin to secure the center mount footrest to the mounting
bracket of the seat frame.
DETAIL "A" - CHAIRS BUILT
BEFORE 12/01/2008
DETAIL "B" - CHAIRS BUILT
AFTER 12/01/2008
Seat Frame Mounting Bracket
FIGURE 5.1 Removing/Installing the Manual Center Mount Footrest
Adjustable ASBA Seat
Mounting Bracket
Center Mount Footrest
Center Mount Footrest
18
Release Lever
Rigging Pivot Pin
NOTE: Release Lever
located towards the front or
center of seat frame.
Rigging Pivot Pin
Part No 1143238