Alarm Sending - Beward N1000 Operation User's Manual

SMTP server port: type the SMTP server port number. The default value is 25.
SSL: check this box if the provider requires SSL communications.
Authentication: select an authentication type to send e-mails.
 Off: no authentication is required.
 On: authentication is required. You can select [SMTP] or [POP before SMTP].
POP server name: this item is displayed when the [POP before SMTP] option is selected.
The POP server name is used for authorization (64 characters maximum).
User name: type a username to access the mail server (64 characters maximum).
Password: type a password to access the mail server (64 characters maximum).
Recipient e-mail address: type the receiver's e-mail address (64 characters maximum).
You can type up several e-mail addresses separating them by using a semicolon [;].
Administrator e-mail address: type the sender's e-mail address (64 characters
maximum).
IMPORTANT:
To playback recorded video, you may need to install VLC media player. Its official website is
http://www.videolan.org/vlc/.
Subject: type the e-mail subject (64 characters maximum) into this box.
IMPORTANT:
The subject may contain only Latin letters.
Message: type the e-mail text in this box (384 characters maximum).
[Test]: click this button to check the file transfer parameters and transfer a test file.
NOTE:
Click [ОК] to save changes. Otherwise, the changes may not be saved.

7.2.2. Alarm Sending

This section allows you to configure e-mail notification when an alarm is triggered. Select
the option for [On] to enable this option (Pic. 7.8).
N1000 Operations User Manual
Chapter 7. SETTING: Advanced
58