Camera - Beward N1000 Operation User's Manual

Restore Setting: allows you to restore previously saved settings. Click [Browse] button. In
the appeared window select the required file by clicking your left mouse button on the name of the
file and click [Open]. Click [OK] to start restoring the settings. When the restoration is completed,
the camera automatically restarts to apply the settings.
Firmware Upgrade: this item allows you to update the camera firmware. Click [Browse]
button. In the appeared window select the required file by clicking your left mouse button on the
name of the file and click [Open]. Click [OK] to start updating the firmware.
NOTE:
When the firmware is updated, all settings may automatically restore to their defaults. Before you start
updating the firmware, it is recommended to perform a backup of camera settings.
When the update is completed, the camera automatically restarts.
IMPORTANT:
When the update is completed, it is recommended to reset camera settings to their factory defaults.
IMPORTANT:
Be careful when you update camera firmware. Make sure that you use only the firmware designed for your
IP camera. Using the wrong firmware file may cause your camera to become inoperable. The
manufacturer is not liable for the incorrect firmware update. Do not disconnect your camera until the
update is completed.
Upload Language Pack: this menu allows you to change the web interface language by
loading a language file pack.
IMPORTANT:
Be careful when you loading a language pack. Make sure that you use only the language pack designed
for your IP camera. Using the wrong language pack may cause your camera to become inoperable. The
manufacturer is not liable for the incorrect loading of a language pack.

6.2. Camera

The [Camera] menu contains the following sections: [General], [MPEG-4], and [MJPEG]
(Pic. 6.7).
N1000 Operations User Manual
Chapter 6. SETTING: Basic
29