Mode; View Size; Protocol - Beward N1000 Operation User's Manual

5.3.1. Mode

This item allows you to select a compression from a list of available compressions: MPEG-
4, Motion JPEG and JPEG (sends individual JPEG images sequentially).
IMPORTANT:
To view MJPEG video, you need to disable [RTSP] at SETTING – Basic – Camera – General.
NOTE:
Displaying of some menu items depends on selected compression. Detailed information is discussed later
in this Manual.

5.3.2. View Size

This item allows you to adjust image resolution: 640х480, 320х240. This item is available
for all compressions.

5.3.3. Protocol

This item allows you to select any of the available protocols: HTTP, TCP, UDP, or Multicast.
This item is only available when [MPEG-4] or [MJPEG] mode is selected and RTSP is enabled.
HTTP: select this item to stream video over HTTP protocol.
TCP: select this item to stream video over TCP, RTSP is used as a control protocol.
UDP: select this item to stream video over UDP, RTSP is used as a control protocol.
Multicast: select this item to steam video once to many users. It reduces bandwidth usage
by delivering a single stream of information to multiple network recipients.
IMPORTANT:
[Multicast] mode is available only if [MPEG-4] compression is selected.
When selecting any of available transport protocols, it automatically assigns data port:
HTTP – 80, TCP – 554. If UDP is selected, it uses strictly defined port numbers range. The port
number is assigned when the camera establishes connection with a client.
NOTE:
«HTTP» protocol is for networks where port number restriction is used. When such a security policy is
applied, most of the nonstandard ports are closed but port 80 is often open (443, 554, etc) and is used by
this connection type.
IMPORTANT:
When [Multicast] mode is selected, the number of simultaneous users for viewing the image is not
N1000 Operations User Manual
Chapter 5. Main Menu
22