Beward N1000 Operation User's Manual page 50

User name: type a username (5-16 characters).
Password: type a password (5-16 characters). You can use a blank password.
Re-type Password: re-type the entered password to avoid mistakes in password
assignment. If you re-type the password incorrectly, you will see an error message.
IMPORTANT:
The username and password may contain only Latin letters.
Viewer mode: allows you to set user permissions. The following options are available:
 Admin: this user is able to change any parameters
 Operator: this user is able to view camera image and adjust image parameters. The
Operator can access the [Client setting] and [Image setup] menu.
 Viewer: this user is able only to view camera image. The Viewer can access only the
[Client setting] menu.
Viewer authentication: this item allows you to turn on or off user authorization to access
the camera image.
 On: when this option is selected, a user needs to enter the username and password to
access the camera.
 Off: when this option is selected, a user does not need to enter a username and
password to access the camera. A user may specify one of the following viewer modes:
Admin, Operator, and Viewer.
N1000 Operations User Manual
Pic. 6.25
Chapter 6. SETTING: Basic
49