Beward N1000 Operation User's Manual page 28

Date/Time format: allows you to select date/time format.
Adjust: allows you to select how to set the camera date and time.
 Keep current setting: leaves the current date and time as they are.
 Synchronize with PC: use the same date and time as on a computer, which is used to
connect to the camera.
 Manual setting: select this mode to adjust the camera the date and time manually.
 Synchronize with NTP: allows you to synchronize your camera clock with an NTP
server (Network Time Protocol) located in the Internet (e.g. time.windows.com,
time.nist.gov, etc). Select an NTP server name and a time update interval (by default,
camera clock is typically updated once an hour).
NOTE:
By default, the camera synchronizes clock with the following NTP server: pool.ntp.org.
IMPORTANT:
To synchronize time with an Internet time server, an NTP server must be located in a local network or in
the Internet. The camera must be connected to the Internet to synchronize time with an Internet time
server.
Time Zone: select your current time zone for the camera. The correct time zone is
important for the correct synchronization with an NTP server.
Daylight Saving Time: this item allows your camera's clock to be automatically adjusted
when daylight saving time changes. This parameter is important for the correct synchronization
with an NTP server. You can specify the start time and the end time so that the camera's clock
could be adjusted by date or by week number (Pic. 6.5).
N1000 Operations User Manual
Pic. 6.5
Chapter 6. SETTING: Basic
27