Video Buffer; Image Setup; Brightness; Contrast - Beward N1000 Operation User's Manual

limited. To enable it, go to SETTING – Basic – Camera – MPEG4 – Computer view. When using the
other modes, the maximum number of simultaneous connections is 5 (depends on network port use)

5.3.4. Video Buffer

This item allows you to enable or disable video buffer function. When this function is
enabled, it makes the video stream from the IP camera smoother when the connection is unstable
but may cause image delays up to several seconds.

5.4. Image Setup

This menu allows you to adjust [Brightness], [Contrast], [Saturation], and [Hue] (Pic.
5.7).

5.4.1. Brightness

This item allows you to increase or decrease the image brightness.

5.4.2. Contrast

This item allows you to increase or decrease the image contrast.
N1000 Operations User Manual
Pic. 5.7
Chapter 5. Main Menu
23