Beward N1000 Operation User's Manual page 38

NOTE:
Go to SETTING – Basic – Camera – General to enable the [RTSP].
Viewer authentication: if this option is enabled, a user should enter user name and
password to view camera image via third-party players such as Quick Time, VLC, etc.
Multicast streaming: this item allows you to enable or disable multicast stream. If it is
enabled, the following items are available: [Multicast address], [Video port], [Audio port], and
[Time-To-Live] (Pic. 6.15). By default, this item is disabled.
IMPORTANT:
To use multicasting, your network router must support it.
Multicast address: multicast IP address. The default value is 226.0.0.1.
Video port: multicast video port. Assigned automatically or you can set the value of the port
between the values of 1124 and 65534. The default value is 10000.
N1000 Operations User Manual
Pic. 6.14
Chapter 6. SETTING: Basic
37