Chapter 3. Using Third Party Clients; Playing 3Gp Video; Playing Streaming Video In 2.5G Networks Over Wap; Playing Streaming Video In 2.5G Networks Via Browser - Beward N1000 Operation User's Manual

The N1000 supports RTSP/RTP streaming.
RTSP (Real Time Transfer Protocol) is a network control protocol designed for use in
entertainment and communications systems to control streaming media servers. The protocol is
used for establishing and controlling media sessions between end points. Clients of media servers
issue VCR-like commands, such as play and pause, to facilitate real-time control of playback of
media files from the server (see paragraph 6.2.1 for details).
NOTE:
You can play RTSP stream with any supported video player (Real Player, VLC, Quick Time, etc).

3.1. Playing 3GP Video

You can view camera image on a computer as well as a mobile device such as cell phones,
smart phones, PDA, etc (iPhone supported as well). You can configure the stream to be viewed on
a mobile device at SETTING – Basic – Camera – MPEG-4 – Mobile view.
IMPORTANT:
To view 3GP video, you need to enable [RTSP] at SETTING – Basic – Camera – General.
If your phone does not support streaming video, type «rtsp://<IP>:<PORT>/video.3gp» in
a streaming player installed in your phone to view the 3GP video. <IP> means public IP address of
your camera, <PORT>
rtsp://89.57.167.76:554/video.3gp.

3.2. Playing Streaming Video in 2.5G Networks over WAP

If your phone is used on a 2.5G network, type «http://<IP>/mobile.wml» in the WAP
browser's address bar to the view video over WAP. <IP> means public IP address of your camera.

3.3. Playing Streaming Video in 2.5G Networks via Browser

If your phone is used on a 2.5G network, type «http://<IP>/mobile.htm» in the browser's
address bar to view the video. <IP> means public IP address of your camera.

3.4. Playing Streaming Video via Third Party Software

If your computer is connected to high-speed Internet or you need to view streaming video in
other formats, you can use real time RTSP players such as VLC, Quick Time, Real Player, etc.
N1000 Operations User Manual

Chapter 3. Using Third Party Clients

means RTSP
Chapter 3. Using Third Party Clients
port (default value is 554). Example:
9