Beward N1000 Operation User's Manual page 57

Remote path: specify the path on the FTP server (64 characters maximum) to save
transferred files. For example, ipcam/example.
Image file name: type a name for the files transferred to the FTP.
NOTE:
Image file name may contain only Latin letters, reserved characters and numbers with no spaces in its
name.
Suffix: select a suffix to add it to the file name. The following options are available:
 None: do not add any suffix to the file name. An old file will be overwritten by a new one
when the camera uploads it to the FTP.
 Date Time: adds the date and time that correspond to the date and time the file was
created. This suffix contains the year as 4 digits, the month as 2 digits, the day as 2
digits, the hour as 2 digits, the minute as 2 digits, the second as 2 digits. Totally, this
adds a fourteen-digit suffix to the file name.
 Sequence number: adds a six-digit number. User can click the [Clear] button to reset
the sequence number anytime. When user clicks the [Clear] button it resets the
sequence number and starts it from 000001.
Interval: allows you to set a frequency of alarm triggered uploading files. The minimum
value is 1 minute; the maximum value is 24 hours.
Effective period: allows you to set a period for uploading files to FTP. The following
options are available:
 Always: select this option for continuous uploading of files.
 Schedule: select this option for scheduled uploading of files. To configure this option,
click the [Schedule] button or go to SETTING – Advanced – Schedule. See paragraph
7.4 for details.
IMPORTANT:
If the camera has been recording by alarm when the scheduled recording starts, the scheduled recording
and uploading of files will be performed in the next interval specified in the [Interval] item.
NOTE:
Click [ОК] to save changes. Otherwise, the changes may not be saved.
N1000 Operations User Manual
Chapter 7. SETTING: Advanced
56