Schedule - Beward N1000 Operation User's Manual

Motion detection: the camera activates the external alarm device when motion detection is
triggered. To configure this option, click the [Motion detection] button or go to SETTING –
Advanced – Motion detection. See paragraph 7.5 for details.
 Parameter: specify a CGI command parameter (Go to SETTING – HTTP event–
General to set an IP address).
 Message: specify a request type. This option may be unavailable for some external
alarm devices.
Effective period: allows you to set a period when the external alarm device can be
activated. The following options are available:
 Always: select this option for continuous e-mail sending.
 Schedule: select this option for the scheduled activation. To configure this option, click
the [Schedule] button or go to SETTING – Advanced – Schedule. See paragraph 7.4
for details.

7.4. Schedule

This section allows you to specify a schedule for the functions mentioned before. You can
specify a schedule for each day of the week or apply it for a whole week by checking the [Use the
same time schedule every day] box (Pic. 7.13).
Schedule selection: allows you to specify a schedule for a certain event. The following
events are available: [FTP – Alarm], [FTP – Periodical], [E-mail (SMTP) – Alarm], [E-mail
(SMTP) – Periodical], [HTTP event– Alarm].
N1000 Operations User Manual
Pic. 7.13
Chapter 7. SETTING: Advanced
64