Setting Backlight Options - Inter-Tel ENDPOINT 8690 User Manual

S B
ETTING ACKLIGHT
To save power and extend the life of the display, you can set an option that will auto-
matically shut off the display's backlight. When the endpoint remains inactive for the
specified amount of time, the display automatically goes into "sleep" mode and the
screen goes dark. To "wake" the screen, either lift the handset or touch the screen. An
incoming call or input from an external mouse or keyboard will also "wake" the
screen.
The default backlight timeout is four hours. You can select a different backlight time-
out as explained below.
NOTE:
UC Message alerts (see
"wake" the screen, however software upgrade prompts (see
To change the default value for the backlight timeout:
Press Start - Settings -
1.
Double-press
2.
Select the Backlight tab.
3.
Select the
4.
Select the amount of time you want the endpoint to remain idle before the back-
5.
light turns off. Timeout choices include:
• 1 minute
• 2 minutes
• 5 minutes
• 10 minutes
• 15 minutes
• 30 minutes
• 1 hour
• 4 hours
Press
6.
®
Inter-Tel Model 8690 User Guide (ITP Mode)
O
PTIONS
page
Control Panel
.
Display
Automatically turn off backlight while on external power
.
OK
117) and status alerts (see
page 42
.
page 118) do not
) do.
option.
33