Outside Calls - Inter-Tel ENDPOINT 8690 User Manual

To receive a non-handsfree intercom call:
EITHER, Press the
OR, Lift the handset for privacy.
NOTE:
You must lift the handset if the caller has the Ring Intercom Always feature
(377) enabled.
Instead of answering a ringing call, you can press one of the following menu but-
tons:
•
SEND TO V-MAIL
see this option if you do not have a mailbox.
•
IC CALL TO DND
(See page 63
•
SEND TO DEST
enter. (See

Outside Calls

With outside calls, you can talk to people who aren't members of your telephone sys-
tem. When you make an outside call, however, you must dial any area codes or long
distance digits that your telephone company requires.
Placing Outside Calls
To place an outside call:
With or without the handset lifted, press
1.
ton.
Dial the desired number.
2.
NOTE:
dial an account code before you can place your call (see
Depending on how your system is programmed, you may be able to use one of the
following methods to select an outgoing line, instead of pressing the
ton:
•
Dial the Outgoing Call access code (default is
•
Dial a Select Line Group access code (defaults are 92001-92208).
•
Dial the Automatic Route Selection (ARS) access code (default is 92000).
NOTE:
ized feature/access codes, or if the auto dial feature (see
dial out directly.
®
Inter-Tel Model 8690 User Guide (ITP Mode)
.
Answer
Sends the call directly to your voice mailbox. You will not
:
Places your endpoint in DND mode and blocks the call.
:
for more information about DND mode.)
Redirects the call to the intercom or outside number that you
:
page 55 for more information about the Redirect Call feature.)
If you see a request for an account code and hear a single beep, you must
Check with your system administrator to see if your system uses custom-
or the
Outgoing OUTGOING
page 81).
).
8
page 37) allows you to
menu but-
but-
Outgoing
47