Using The Demo; Keyboard Commands; Using The Media Server; Runtime Keyboard Commands - Intel IP Media Server Demo Manual

Running the Demo
Table 1. Command Line Switches (Continued)
-n<n>
-q
Example
The following example shows how to launch the demo from a command line with options:
IPMediaServer -n64 -cmyconfig.cfg -ea
This command launches the demo with 64 channels, using the myconfig.cfg configuration file and
A-law encoding.
4.3

Using the Demo

This section describes how to use the IP Media Server for HMP demo and contains the following
topics:
•

Keyboard Commands

•

Using the Media Server

4.3.1 Keyboard Commands
The demo always waits for input from the keyboard. While the demo is running, you may enter any
of the commands listed in Table 2.
Table 2. Runtime Keyboard Commands
q or Q or Ctrl+c
4.3.2 Using the Media Server
The IP Media Server for HMP demo allows the caller to interact with a series of voice menus, using
the telephone keypad to enter an option. Basic operations include playing a pre-recorded message,
recording a new message, sending or receiving a fax, and barge-in for CSP. Each menu prompts the
caller to select an action by pushing a key. The call state within which the menu is called is
indicated by the square brackets. Figure 1 shows the voice prompt flow, grouping the prompts by
feature (voice, fax, CSP).
Note: By default, the fax demo is turned off. This feature may be enabled when tested with T.38 capable
IP endpoints. To do this, uncomment the line:
TxType = t38UDPFax
in the Capability section of the IPMediaServer.cfg file (or add the line if not present as a comment).
20
Sets the number of channels
Activates Quality of Service
Command
The lesser of Voice Devices
or IP devices
Disabled
Function
Terminates the application
IP Media Server for HMP Demo Guide — July 2005