Reset Configuration Data; Resources Controlled By; Irq Resources - Albatron PX875P User Manual

Px875p series
Table of Contents

Advertisement

P.A.T. Mode
Allows user to enable "Performance Acceleration Technology" in FSB800/ DDR400 mode, using
PAT can employ a specially configured "shortcut" or "by pass" when accessing memory, slicing
se
veral clock cycles from the access times and reducing conventional latency factors. Preliminary
tests have shown that system performance and
If you want to set the "Turbo" or the "Ultra" o
overclock. Overclocking can damage the memory DIMMs or other sensitive components.
Options: Auto (default)、Compatibl
PnP/PCI Configurations

Reset Configuration Data

S
elect "Enabled" to reset the Extended System Configuration Data (ESCD) if you have installed a
new add-on card and the system reconfigur
boot. Options: Disabled (default)、

Resources Controlled By

BIOS can automatically configure all the boot and
Auto, you will not be able to manually assign IRQ
BIOS automatically assigns them. Option

IRQ Resources

When resources are controlled manually, you
th
e type of device using the interrupt. This is only configurable when "Resources Controlled By" is
set to "Manual".
Options: IRQ-3/ 4/ 5/ 7/ 9/ 10/ 11
PCI / VGA Palette Snoop
Some graphic controllers that are not VGA compatible take the output from a VGA controller and
map it to their display as a way to provide boot information and
O
ptions: Disabled (default)、Enabled
PCI Latency Timer (CLK)
This item allows you to set up the PCI Latency Time (0-255). If you select the "32" it
PCI speeds. Options: 0-2
55、32 (default)
P
CI SLOT1- 5
T
his item allows you to select an IRQ address for PCI slot 1-5.
O
ptions: Auto (default)、3、4、5、7、9、10、11、12、14、15
efficiency can be increased about 3% - 5%.
ptions, please make sure your memory DIMMs can be
e (Slowest)、PAT-Disabled、Turbo、Ultra (Fastest)
ation has caused such a serious conflict that the OS cannot
Enabled
Plug and Play compatible devices. If you choose
DMA and memory base address fields, since
s: Auto (ESCD) (def
can assign each system interrupt a type, depending on
/ 12/ 14/ 15
assigned to
30
PX875P PRO/ PX875P
ault)、Manual
PCI device
VGA compatibility.
will optimize

Advertisement

Table of Contents
loading

This manual is also suitable for:

Px875p pro

Table of Contents