Video Ram Cacheable; Pnp Os Installed; Reset Configuration Data; Resources Controlled By - Albatron KX400-8XV User Manual

Video RAM Cacheable

Select "Enabled" to allow caching of the video RAM which may improve performance. If any other
program writes to this memory area, a system error may result. Options: Enabled、Disabled (default)
PnP/PCI Configurations

PNP OS Installed

When set to "YES", BIOS will only initialize the PnP cards used for the boot sequence (VGA, IDE,
SCSI). The rest of the cards will be initialized by the PnP operating system like Windows
set to "NO", BIOS will initialize all the PnP cards. For non-PnP operating systems (DOS, Netware),
this option must be set to "NO".
Options: No (default)、Yes

Reset Configuration Data

Select "Enabled" to reset the Extended System Configuration Data (ESCD) if you have installed a
new add-on card and the system reconfiguration has caused such a serious conflict that the OS cannot
boot. Options: Disabled (default)、Enabled

Resources Controlled By

BIOS can automatically configure all the boot and Plug and Play compatible devices. If you choose
Auto, you will not be able to manually assign IRQ DMA and memory base address fields, since
BIOS automatically assigns them. Options: Auto <ESCD> (default)、Manual

IRQ Resources

When resources are controlled manually, you can assign each system interrupt a type, depending on
the type of device using the interrupt. This is only configurable when "Resources Controlled By" is
set to "Manual".
IRQ-3 assigned to: PCI device
IRQ-4 assigned to: PCI device
IRQ-5 assigned to: PCI device
IRQ-7 assigned to: PCI device
IRQ-9 assigned to: PCI device
IRQ-10 assigned to: PCI device
IRQ-11 assigned to: PCI device
IRQ-12 assigned to: PCI device
IRQ-14 assigned to: PCI device
IRQ-15 assigned to: PCI device
KX400-8XV V2.0 Series
31
®
95. When