System Bios Cacheable; Reset Configuration Data; Resources Controlled By - Albatron PX848 Like Series User Manual

PX848 Like Series
Performance Acceleration
This item allows you to select the registers status that about DRAM performance.
Options: Full On (default)、Auto
AGP Aperture Size (MB)
Select the size of the AGP (Accelerated Graphics Port) aperture. The aperture is a portion of the PCI
memory address range dedicated for graphics memory address space. Host cycles that hit the aperture
range are forwarded to the AGP without any translation.
Options: 16、32、64、128 (default)、256
MEM Addr/ Cmd Setup Time
This item allows you to select memory address/ command time before CS# is sampled asserted.
Options: 2T (default)、1T

System BIOS Cacheable

When enabled, accesses to system BIOS ROM addressed at F0000H-FFFFFH are cached, provided
that the cache controller is enabled. Options: Enabled (default), Disabled
AGP 3.0 Transfer Mode
This item allows you to select the AGP3.0 mode. Options: 8X (default)、4X
AGP Fast Write
This AGP Fast Write technology allows the "CPU to write directly to the graphics card bypassing the
system AGP speed. Choose "Enabled" only when you used with AGP card support.
Options: Enabled (default)、Disabled
PnP/PCI Configurations

Reset Configuration Data

Select "Enabled" to reset the Extended System Configuration Data (ESCD) if you have installed a
new add-on card and the system reconfiguration has caused such a serious conflict that the OS cannot
boot. Options: Disabled (default)、Enabled

Resources Controlled By

BIOS can automatically configure all the boot and Plug and Play compatible devices. If you choose
Auto, you will not be able to manually assign IRQ DMA and memory base address fields, since
BIOS automatically assigns them. Options: Auto (ESCD) (default)、Manual
26