Chapter 4: Troubleshooting - Albatron PX875P User Manual

Chapter 4: Troubleshooting

Problem 1:
No power to the system. Power light does not illuminate. Fan inside powe
Indicator lights on keyboard are not lit.
Causes:
1. Power cable is unplugged.
2. Defective power cable.
3. Power supply failur
4. Faulty wall ou tlet; circuit breaker or fu
S olutions :
1. Ma ke sure power cable is securely plugged in.
2. Rep lace cable.
3.Contact tech nical support.
4.Use different socket, repair outlet, reset c
P roblem 2:
S ystem inoperative . Keyboard lights are
sy stem seems "hung "
Causes: Memory DIMM is partially dislodged from t
Solutions:
1. Power Down
2. Using even pressure on both ends of the DIMM, press down firmly until the module snaps into
place.
Proble m 3:
System does no t boot from th
Causes:
1. Connector between hard drive and system board unplugged.
2. Damaged hard disk or disk controller.
3. Hard disk directory or FAT is corrupted.
S olutions:
1. Check the cable running from the disk to the disk controller board. Make
securely attached. Check the drive type in the standard CMOS setup.
2. Contact technical support.
3. Backing up the hard drive is extremely important. Make sure your periodically perform backups
to avoid untimely disk crashes.
e.
se blown.
ircuit breaker o
on, power
e hard disk drive but can be booted from the CD-ROM drive.
49
PX875P PRO/ PX875P
r supply does not turn on.
r replace fuse.
indicator lights are lit, hard drive is
he slot on the mainboard.
active but
sure both ends ar e