PM266A PRO/ PM266A
System BIOS Cacheable
When enabled, accesses to system BIOS ROM addressed at F0000H-FFFFFH are cached, provided
that the cache controller is enabled. Options: Enabled、Disabled (default)
Booting OS Selection
This item allows you to select the OS which you want to booting with.
Options: Novell Netware、MS Windows (default)
PnP/PCI Configurations
PNP OS Installed
When set to "YES", BIOS will only initialize the PnP cards used for the boot sequence (VGA, IDE,
SCSI). The rest of the cards will be initialized by the PnP operating system like Windows® 95. When
set to "NO", BIOS will initialize all the PnP cards. For non-PnP operating systems (DOS, Netware),
this option must be set to "NO".
Options: No (default)、Yes
Reset Configuration Data
Select "Enabled" to reset the Extended System Configuration Data (ESCD) if you have installed a
new add-on card and the system reconfiguration has caused such a serious conflict that the OS cannot
boot. Options: Disabled (default)、Enabled
Resources Controlled By
BIOS can automatically configure all the boot and Plug and Play compatible devices. If you choose
Auto, you will not be able to manually assign IRQ DMA and memory base address fields, since
BIOS automatically assigns them. Options: Auto <ESCD> (default)、Manual
IRQ Resources
When resources are controlled manually, you can assign each system interrupt a type, depending on
the type of device using the interrupt. This is only configurable when "Resources Controlled By" is
set to "Manual".
IRQ-3/4/5/7/9/10/11/12/14/15
assigned to: PCI device
PCI / VGA Palette Snoop
Some graphic controllers that are not VGA compatible take the output from a VGA controller and
map it to their display as a way to provide boot information and VGA compatibility.
Options: Disabled (default)、Enabled
29