Universal Serial Bus; Watch Dog Timer - Albatron PX875P User Manual

Universal Serial Bus:

Supports up to eight USB ports for USB interface devices
Supports USB 2.0 Enhanced Host Controller Interface (EHCI) and USB 1.1 Open Host
Controller Interface (OHCI)
Serial ATA facilities:
Compatible with SATA Spec 1.0
Supports Serial ATA specification of 150 MB/sec transfers
I/O facilities:
One multi-mode Parallel Port capable of supporting the following specifications:
1. Standard & Bi-direction Parallel Port
2. Enhanced Parallel Port (EPP)
3. Extended Capabilities Port (ECP)
Supports two serial ports, 16550 UART
Supports Infrared Data Transmission using IrDA
Supports PS/2 mouse and PS/2 keyboard
Supports 360 KB, 720 KB, 1.2 MB, 1.44 MB, and 2.88 MB floppy disk drives
Game port/ MIDI port compatible (only for V1.0)
BIOS:
Phoenix-Award™ BIOS
Supports APM1.2
Supports ACPI power management
AGP protection:
This mainboard provides an AGP slot for 0.8V/ 1.5V AGP cards. The AGP protection
function is to protect the mainboard and AGP cards if a 3.3V card is installed

Watch Dog Timer:

This mainboard contains a special feature called the "Watch Dog Timer" which is used to
detect when the system is unable to handle over-clocking configurations during the POST
stage. Once a problem is detected the system will reset the configurations and reboot the
system after five seconds
PX875P PRO/ PX875P
4