Headers & Jumpers - Albatron PX875P User Manual

Headers & Jumpers
Front USB Headers: USB2/ USB3/ (USB4 for V1.0 only)
The V1.0 series mainboard provide three
ports. And the V2.0 series m
4 USB ports. These attach
USB bracket (optional).
1 2
5VSB
DATA_A-
DATA_A+
Ground
NC
9
USB2/3/4
USB Bracket (optional)
An optional USB bracket may be included with your board. The bracket is typical secured to the back
side of your computer case and has standard USB ports that you can connect to ex
The bracket will also have cables that you can extend to
only for PX875P PRO V1.0) headers.
* If you are using USB 2.0 devices with Windows 2000/ XP, you will need to install the USB 2.0
driver from the Microsoft
Infrared Head er: IrDA
This IrDA connector can be configured to support wireless infrared and is used to attach to an
infrared sensing d evice. After the IrDA interface is configured, you can use
co nnectionless data transfer to and from portable devices such as laptops and PDAs.
1
NC
+5V
IR_TX
5 6
IrDA
USB headers (USB2/ 3/ 4) on the board allowing for 6 USB
ainboard provide two USB headers (USB2/ 3) on the board allowing for
to USB connectors embedded into the computer case or connected to a
BIOS
5VSB
DATA_B-
DATA_B+
Ground
NC
10
®
website.
BIOS
2
NC
Ground
IR_RX
17
PX875P PRO/ PX875P
S ocket 478
DIM M1
DIM M2
DIM M3
DIM M4
ternal USB devices.
the USB2, USB3 or USB4 (the USB4 header
this co
S ocket 478
DIM M1
DIM M2
DIM M3
DIM M4
nnector for