Onboard Lan Boot Rom; Power On Function - Albatron PX875P User Manual

Onboard LAN Boot ROM

Decide whether to invoke the boot ROM of the onboard LAN chip.
Options: Disabled (default)、Enabled
Onboard I/O Chip Setup
PWRON After PWR-Fail
This field will determine whether your system will boot after restoring power after a power failure. If
you select "On", the system will boot whether or not the system was on before power failure. If you
select "Former-Sts", the system will be restored to the status before the power failure.
Options: Off (default)、On、Former-Sts

Power On Function

This option allows you to select a way to power on your computer. Options: Password、Hot KEY、
Mouse Left、Mouse Right、Any KEY、BUTTON ONLY (default), and Keyboard 98
KB Power On Pa ss or
This it the p assword that your system will use as part of the power-on sequence. This field is only
configurable when "Power On Funct
Hot Key Power ON
This option allows you to use the C
system. This field is only configu
Options: Ctrl
-F1、Ctrl-F2......
Onboard FDC Controlle
Select "Enabled" if your system has
you wish to use it. If you install an a
Options: Enabled (default)、Disable
Onboard Serial Port 1/ P
Select an ad dress and correspo
Options: Disabled、3F8/IRQ4 (def
2E8/IRQ3、Auto
UART M ode Sele ct
T his item allows you to select the Infra Red (IR) standard to be used.
Options: Normal (default)、ASKIR、IrDA
w d
ion" is set to "Password".
trl key along with a hot key (fun
rab le when "Power On Function" is set to "Hot Key".
Ctrl-
F12
r
a floppy disk controller (FDC) installed on the system board and
dd-in FDC or the system has no floppy drive, select "Disabled".
d
ort 2
nding interrupt for the first/ second serial port.
ault for port1)、2F8/IRQ3(default for port2)、3E8/IRQ4、
37
PX875P PRO/ PX875P
ction key) to power on your