Installing The Light Bulbs & Glass Shade - HAMPTON BAY 120-231 User Manual

WARNING: Shut off the power supply before removing or replacing lamp. In
handling of halogen bulb, care should be taken not to touch it with your bare
hands. Oil residue will shorten the life of the halogen bulb. If you accidentally
come into contact, wipe thoroughly with a clean, lint-free, cotton cloth. Allow
the bulb to cool off for 10 minutes before changing the bulb. Use light bulb in
accordance with the fan's specification. TO REDUCE THE RISK OF FIRE
DO NOT EXCEED MAXIMUM WATTAGE RATING.
ATTENTION: The Energy Policy Act of 2005 requires this fan to be
equipped with a 190 watt limiting device. If lamping exceeds 190 watts, the
ceiling fan's light kit will shut off automatically.
Step 1. Install 2x50W halogen bulbs (included). (Fig. 21)
Step 2.
Remove the decorative nut from the light kit. Place glass shade over the
light kit stem, secure with the decorative nut. Do not overtighten. (Fig. 21)
11. Installing the Light Bulbs & Glass Shade
Bulbs
Decorative nut
Figure 21
Light kit stem
Glass shade