Finishing The Installation - HAMPTON BAY 120-231 User Manual

Note: The transmitter only works within 40
feet from receiver.
ON ON
Figure 13
Receiver
Figure 14
Outlet box
Black (hot)
Black ("AC IN L")
Receiver
Black ("to motor L")
Blue ("for light")
Blue (light)
Black (motor)
Hanger bracket
Fan
Figure 15
6. Finishing the
Installation
White (neutral)
Green or bare Step 1. Tuck connections neatly into
copper (ground)
ceiling outlet box.
White ("AC IN N")
Step 2. Slide the canopy up to ceiling and
over the two crews on hanger bracket.
Rotate canopy clockwise. Next, while
White ("to motor N")
holding the canopy with one hand, slide the
canopy cover over the screws and rotate
Ground (Connect to
clockwise until tight. Note: adjust the
ground wire on
(green)
hanger bracket
canopy screws as necessary until the
if no house
ground wire
canopy and canopy cover are snug. (Fig. 16)
exists.)
White (neutral)
Outlet box
Hanger
bracket
Hanger
ball
Figure 16
Canopy
Canopy
cover