Page 1
Item #1005 228 342 Model #AL685LED-ORB USE AND CARE GUIDE DEVEREAUX II 52 INCH CEILING FAN Questions, problems, missing parts? Before returning to the store, call Hampton Bay Customer Service 8 a.m. - 7 p.m., EST, Monday-Friday, 9 a.m. - 6 p.m., EST Saturday 1-855-HD-HAMPTON HAMPTONBAY.COM...
Table of Contents Table of Contents ............Operation ..............Remote Control Operating Instructions ........Safety Information ............Reverse Switch Operating Instructions ........Warranty ................. Care and Cleaning ............Pre-installation .............. Troubleshooting ............Specifications ................Tools Required ................. Service Parts ..............Hardware Included ..............
Safety Information To reduce the risk of electric shock, ensure electricity has However, there is no guarantee that interference will not occur been turned off at the circuit breaker or fuse box before in a particular installation. If this equipment does cause harmful beginning.
Warranty We warrant the fan motor to be free from defects in workmanship and material present at time of shipment from the factory for a period of lifetime after the date of purchase by the original purchaser. We also warrant that all other fan parts, excluding any glass or acrylic blades, to be free from defects in workmanship and material at the time of shipment from the factory for a period of one year after the date of purchase by the original purchaser.
Pre-Installation (continued) HARDWARE INCLUDED HARDWARE INCLUDED NOTE: Hardware shown to actual size unless noted otherwise in the table below. Part Part Description Description Quantity Quantity Plastic wire nut (not to scale) Blade attachment screws with fiber washers (not to scale) 9.5 Watt LED medium base bulb (not to scale) Plastic wire nut (not to scale) 1.5V AAA battery (not to scale)
Installation MOUNTING OPTIONS MOUNTING OPTIONS NOTE: WARNING: You may need a longer downrod to maintain proper To reduce the risk of fire, electric shock, or blade clearance when installing on a steep, sloped ceiling. personal injury, mount the fan to an outlet box marked The maximum angle allowable is 18°...
Assembly Preparing the canopy Preparing the motor □ □ Remove the cotter pin (GG), and clevis pin (HH), and Remove the canopy bottom cover (C) from the canopy loosen the two collar setscrews (II) from the motor (B) by turning the canopy bottom cover (C) counter- collar.
Assembly — Hanging the Fan Hanging the fan from the mounting Installing the mounting bracket bracket to the electrical box WARNING: To reduce the risk of fire, electric shock or WARNING: The tab in the ring must rest in the groove of other personal injury, mount the fan only to an outlet box or the hanger ball (D).
Page 10
Assembly — Hanging the Fan (continued) Preparing the receiver and remote control NOTE: The frequencies on your receiver and remote control have been preset at the factory. Before installing the receiver, make sure the dip switches on the receiver and remote control are set to the same frequency.
Page 11
Assembly — Hanging the Fan (continued) Making the electrical connections WARNING: Check to see that all connections are tight, including ground, and that no bare wire is visible at the wire Ground Black White nuts, except for the ground wire. conductor CAUTION: Do not use with a wall light dimmer switch.
Page 12
Assembly — Hanging the Fan (continued) Attaching the canopy Installing the canopy bottom cover WARNING: Make sure the tab on the mounting bracket (A) NOTE: Adjust the canopy mounting screws (FF) as properly sits in the groove in the hanger ball / downrod necessary until the canopy (B) and canopy bottom cover (C) assembly (D) before attaching the canopy (B) to the mounting are snug.
Assembly — Attaching the Fan Blades Attaching the blades to Fastening the blade the blade arms assemblies to the motor NOTE: Your fan blades are reversible. Select the blade side WARNING: To reduce the risk of personal injury, do not finish which best accentuates your decor.
Assembly — Attaching the Mounting Plate Attaching the mounting plate □ Remove one of the three screws (MM) from the mounting ring (NN) and loosen the other two screws (MM). (Do not remove.) □ Place the key holes on the mounting plate (G) over the two screws (MM) previously loosened from the mounting ring (NN).
Assembly — Installing the Light Kit Attaching the light kit to Installing the light bulbs the mounting plate and glass shade CAUTION: Before starting installation, disconnect the CAUTION: Before starting installation, disconnect the power by turning off the circuit breaker or removing the fuse power by turning off the circuit breaker or removing the fuse at the fuse box.
Operation REMOTE CONTROL OPERATING INSTRUCTIONS REMOTE CONTROL OPERATING INSTRUCTIONS - Press and release the button to turn the fan on or off. - Press and release 1 time - turns the fan on high speed. - Press and release 2 times - turns the fan on medium speed. - Press and release 3 times - turns the fan on low speed.
Operation (continued) REVERSE SWITCH OPERATING INSTRUCTIONS REVERSE SWITCH OPERATING INSTRUCTIONS The reverse switch is located on the mounting plate. Slide the switch to the left for warm weather operation. Slide the switch to the right for cool weather operation. NOTE: Wait for the fan to stop before reversing the direction of the blade rotation.
Troubleshooting WARNING: Make sure the power is off at the electrical panel box before you attempt any repairs. Refer to step 7 “Making the electrical connections” on page 11. Problem Problem Solution Solution □ Check the main and branch circuit fuses or breakers. □...
Service Parts Part Part Description Description Part Part Description Description Mounting bracket (preassembled) Plastic wire nut (not to scale) Canopy Blade attachment screws with fiber washers (not to scale) Canopy bottom cover (preassembled) 9.5 Watt LED medium base bulb (not to scale) Hanger ball / downrod assembly Plastic wire nut (not to scale) Coupling cover...
Page 20
Questions, problems, missing parts? Before returning to the store, call Hampton Bay Customer Service 8 a.m. - 7 p.m., EST, Monday-Friday, 9 a.m. - 6 p.m., EST Saturday 1-855-HD-HAMPTON HAMPTONBAY.COM Retain this manual for future use.