Connecting The Network Interface Unit; Setting Up Network Scanning - Epson DS-1630 User Manual

Connecting the Network Interface Unit

See the documentation that came with the optional Epson Network Interface Unit for instructions on
connecting it to your scanner.
Parent topic:

Setting Up Network Scanning

You can set up network scanning through the optional Epson Network Interface Unit. First connect the
unit to your scanner and verify that both are working properly. Then follow the instructions here to set up
computers for network scanning using the Epson Scan 2 Utility.
Note: Make a note of the IP address or host name of the Epson Network Interface Unit so you can enter
it in these steps.
1. Do one of the following to start the Epson Scan 2 Utility:
• Windows 10: Click
• Windows 8.x: Navigate to the Apps screen and select Epson Scan 2 Utility.
• Windows (other versions): Click
EPSON > Epson Scan 2 > Epson Scan 2 Utility.
• Mac: Open the Applications folder, open the Epson Software folder, and select Epson Scan 2
Utility.
2. Select Settings from the Scanner drop-down list.
Using the Network Interface Unit
and select EPSON > Epson Scan 2 Utility.
or Start, and select All Programs or Programs. Select
26