Connecting The Scanner Using The Usb Interface - Epson GT-15000 User Manual

Note: You can also install optional interface cards in the scanner and use these
for connecting to your computer system. For information about installing and
using the optional IEEE 1394 (FireWire) card or EPSON Network Image Express
card, see Chapter 3, "Using Optional Equipment."
Connecting the Scanner Using the USB
Interface
Before you connect the scanner, make sure you have installed the software, as
described on page 13.
Plug the flat end of the USB cable into any available USB port on your computer or
powered USB hub. Plug the square end into the scanner's USB port.
Note: Your scanner may not work correctly if you use a USB cable other than the
one supplied by EPSON, or if you connect your scanner to a multi-level USB hub
system.
15
Getting Started