Inter-Tel 3000 Quick Reference Manual page 4
Ip phone
Hide thumbs
Also See for 3000:
- Administration manual (139 pages) ,
- Quick reference manual (13 pages) ,
- Getting started manual (34 pages)
Advertisement
Inter-Tel 3000 IP Phone
Quick Reference User Guide
Programming the IP Phone
Programming the IP Phone involves entering the REMOTE SYSTEM IP address. This IP
address will be provided by the Inter-Tel 3000 system administrator. The default password
is "iptpassw" which matches the default password in the Broadband Module. If a different
password is required, it must be entered in the IP Phone and also in the corresponding VoIP
channel in the Broadband Module. All other parameters remain at their default settings
and should not be changed.
Disconnect the power from the phone by removing the black Ethernet cable from the
PHONE connector on the Transformer.
Hold down keypad digits 7 and 8 on the IP Phone and reconnect the black cable to the
Transformer.
Release keypad digits 7 and 8 when the display on the IP Phone shows
PROGRAMMING MODE
PROGRAM DATABASE
DEFAULT DATABASE
EXIT
Select
PROGRAM DATABASE
STATIC IP
9.68..7
REVERT
Select >>
DEFAULT SUBNET
55.55.55.0
REVERT
<<
Select >>
EXIT
>>
EXIT
>>
3
Advertisement
