Factory Pre-Set - TIPTEL 332 SD Operating Instructions Manual

Problem
No telephone number is being
displayed for an incoming call.
Memory card not detected.

Factory pre-set

In the following table, you can see the factory pre-set parameters or values for your
tiptel 332 SD. You can change all these parameters individually. You can easily reset
the device to the factory pre-set parameters via the "set-up menu".
Language
Talking clock
Clock synchronized via CLIP
Recording length
Number of ringing tones until call pick-up
Remote control code
Remote pre-interrogation
Message code
Exchange identification code (telephone systems)
Display contrast (medium)
Automatic two way recording
Message transfer
Appendix
Possible cause
Your telecommunications
provider or telephone system
does not support this function
or the function is not released.
The caller has restricted the
presentation of his telephone
number or has a secret
number.
The call comes from a public
telephone.
The call comes via a telephone
network that does not support
the transfer of the caller's
telephone number.
Card not inserted completely
or incorrectly.
36
Solution / recommendation
Ask your telecommunications
provider or your telephone
system manufacturer whether
the function is possible or
needs to be released.
You may need to flip the card
over and insert it to the stop
position.
(D)
Yes
No
2 minutes
2
-
no
-
-
8
off
off