Volume Adjustment - TIPTEL 332 SD Operating Instructions Manual

Press the selection button next to
the setting to be changed until the
desired setting option is being
displayed.
or
When entering numbers, press the
selection button next to the corres-
ponding line.
Use the arrow buttons (up/down) to
change the setting.
As for settings with more than one
digit or character, you can move
the cursor by pressing the arrow
buttons (left/right).
To complete the entry of numbers,
press the selection button next to
the corresponding line again.
To complete the entry, press the
stop button several times.

Volume adjustment

The volume can be adjusted when the device is in the idle state or during playback.
Press the arrow buttons (left/right)
to adjust the volume.
Settings
The display shows the current setting.
The cursor blinks. As for several setting
options, the current setting will be
deleted.
The display counts up and down.
The selected cursor position blinks.
The cursor stops blinking.
The display resumes the initial state.
The current volume is displayed with the
digits 0 – 8.
12