Set-Up Menu - TIPTEL 332 SD Operating Instructions Manual

Exchange identification ........
code (Prefix)
Display contrast .................... 15 levels are available to set the display contrast.
Automatic two way ................
recording (Auto. monit.)
Destination phone number ..
(Target number)
Default reset .......................... Provided that you confirm the corresponding
Format .................................... After confirming the safety prompt with "Yes" the

Set-up menu

Press Stop and Answering mode at
+
the same time.
Use the arrow buttons (up/down) to
view the available setting para-
meters.
Settings
Here, you enter the identification code (only for tele-
phone systems) to access the public exchange (e. g.
0). This number will then always be dialled auto-
matically before the telephone number. The code "–"
is used to turn this function off.
Off, all or in. If you select "all" the recording starts as
soon as you go off-hook with your telephone con-
nected behind the tiptel 332 SD. Only incoming calls
are going to be recorded if you select "in".
Here, you enter the phone number for the message
transfer (for example your mobile number). A set
number can be deleted by pressing the selection but-
ton next to "X".
question with "yes", the device will resume the
factory pre-set parameters and all OGMs (Outgoing
messages) and settings will be deleted.
memory card will be formatted. All data on that card
will be deleted.
The display shows the set-up menu.
The display shows all available setting
parameters.
11