Factory Pre-Set - TIPTEL 308 clip Operating Instructions Manual

Problem
No telephone number is being
displayed for an incoming call.

Factory pre-set

In the following table, you can see the factory pre-set parameters or values for your
tiptel 308 clip. You can change all these parameters individually. You can easily reset
the device to the factory pre-set parameters via the "set-up menu".
Language
Recording length
Recording quality (maximum)
Number of ringing tones until call pick-up
Remote control code
Remote pre-interrogation
Message code
Display contrast (medium)
Outgoing message
Answering mode
Appendix
Possible cause
Your telecommunications
provider or telephone system
does not support this function
or the function is not released.
The caller has restricted the
presentation of his telephone
number or has a secret
number.
The call comes from a public
telephone.
The call comes via a telephone
network that does not support
the transfer of the caller's
telephone number.
29
Solution / recommendation
Ask your telecommunications
provider or your telephone
system manufacturer whether
the function is possible or
needs to be released.
(D)
2 minutes
2
2
-
no
-
8
3 (pre-recorded)
off