Button Assignment - TIPTEL 332 SD Operating Instructions Manual

Button assignment

2 sec.
or
or
and
and
2 sec.
2 sec.
Operating elements
Playback: Starts the playback of new and not yet played back incoming
messages. Allows the repetition of the last 3 seconds when being pressed
during playback.
Playback button pressed 2 seconds: Starts the playback of all incoming
messages. The playback starts with the oldest and ends with the latest
message.
Stop: Stops a function that is currently being executed and serves to exit an
open menu.
Answering mode: Activates or deactivates the answering mode.
Outgoing message (OGM): When pressed briefly, starts the playback of the
current outgoing message. When you press the button and keep it pressed,
you can start the recording of the currently set outgoing message.
Recording: Starts the recording of a personal information (dictate). When
pressed during a phone conversation, starts the two-way conversation
recording.
Arrow buttons (up/down): Are used to open the call list and to navigate and
make settings in the set-up menu.
Arrow buttons (left/right): Are used to change the volume and to move the
cursor to the left or right side.
Selection button: This button serves to select entry fields and functions
which are shown in the display next to the corresponding button.
Stop and Answering mode pressed at the same time: Opens the set-up
menu.
Answering mode and Playback pressed at the same time: Activates or
deactivates the message transfer function.
Answering mode button pressed for 2 seconds: opens the set-up menu of
the absent-subscriber-manager.
Stop, keep pressed for 2 sec. to show the current firmware version.
4