When entering digits press the se-
lection button next to the desired
line.
Change the settings using the con-
trol buttons (up/down).
For settings with several digits
move the entry location to the re-
quired location using the control
buttons (left/right).
To end digit entry press the selec-
tion button next to the desired line
again.
To stop the entry press stop several
times.
Adjusting the volume
You can set the volume when the device is in the initial state.
Set the volume using the control
buttons (left/right).
Settings
The entry location flashes.
The display counts up or down.
The selected entry location flashes.
The entry location stops flashing.
The initial state is again displayed.
The volume bar shows the current set-
ting.
85