Using The Mouse In Live View; Using An Auxiliary Monitor - HIKVISION DS-9100HFI-ST Series User Manual

User Manual of DS-9100HFI-ST Series DVR

3.2.2 Using the Mouse in Live View

Name
Menu
Single Screen
Multi-screen
Previous Screen
Next Screen
Start/Stop Auto-switch
All-day Playback
Aux Monitor
Note: The dwell time of the live view configuration must be set before using Start Auto-switch.
Note: If you enter Aux monitor mode and the Aux monitor is not connected, the mouse operation is disabled;
witch back to the Main output with the MAIN/AUX button on the front panel or remote.
Note: If the corresponding camera supports intelligent function, the Reboot Intelligence option will be included
when right-clicking mouse on this camera.

3.2.3 Using an Auxiliary Monitor

Certain features of the Live View are also available while in an Aux monitor. These features include:
•
Single Screen: Switch to a full screen display of the selected camera. Camera can be selected from a
dropdown list.
•
Multi-screen: Switch between different display layout options. Layout options can be selected from a
dropdown list.
•
Next Screen: When displaying less than the maximum number of cameras in Live View, clicking this
Table 3.4 Mouse Operation in Live View
Description
Enter the main menu of the system by right clicking the mouse.
Switch to the single full screen by choosing channel number from the dropdown list.
Adjust the screen layout by choosing from the dropdown list.
Switch to the previous screen.
Switch to the next screen.
Enable/disable the auto-switch of the screens.
Play back the video of the selected channel.
Switch to the auxiliary output mode and the operation for the main output is
disabled.
Figure 3.1 Right-click Menu
31