HIKVISION DS-9100HFI-ST Series User Manual page 70

User Manual of DS-9100HFI-ST Series DVR
Note: You must set the Storage mode in the HDD advanced settings to Group before you set the HDD property
to Redundant. For detailed information, please refer to Chapter 10.4 Managing HDD Group. There should be at
least another HDD which is in Read/Write status.
3. Enter the Record setting interface.
Menu> Record> Encoding
1)
Select Record.
2) Select Camera you want to configure.
3) Click More Settings.
4) Set the Redundant Record/Capture to Yes.
5) Click OK to save settings and back to the upper level menu.
Repeat the above steps for configuring other channels.
Figure 5.33 Encoding Record
Figure 5.34 Encoding Record- More
69