User Manual of DS-9100HFI-ST Series DVR
to enter the Copy Camera menu, as shown in Figure 10.19.
6.
Select the camera (s) to be configured with the same quota settings. You can also click the checkbox of
Analog to select all cameras.
7.
Click the OK button to finish the Copy settings and back to the Storage Mode interface.
8.
Click the Apply button to apply the settings.
Note:
If the quota capacity is set to 0, then all cameras will use the total capacity of HDD for record and
picture capture.
Figure 10.19 Copy Settings to Other Camera(s)
166