User Manual of DS-9100HFI-ST Series DVR
9.2 Configuring Advanced Settings
9.2.1 Configuring PPPoE Settings
Purpose:
Your DVR also allows access by Point-to-Point Protocol over Ethernet (PPPoE).
Steps:
1.
Enter the Network Settings interface.
Menu > Configuration > Network
2.
Select the PPPoE tab to enter the PPPoE Settings interface, as shown in Figure 9.5.
3.
Check the PPPoE checkbox to enable this feature.
4.
Enter User Name, Password, and Confirm Password for PPPoE access.
Figure 9.4 Net Fault-tolerance Working Mode
Figure 9.5 PPPoE Settings Interface
138