Using The Mouse In Live View - HIKVISION DS-7208HTI-K2 User Manual

DS-720xHTI-Kx DVR User Manual
Table 1-8 Priorities of Outputs in Independent Output Mode
S.N HDMI VGA CVBS
1 √ √ √ or × HDMI
2 √ or × × √ or × HDMI
3 × √ √ or × VGA
√ means the interface is in use, × means the interface is out of use or the connection is invalid. HDMI,
VGA, and CVBS can be used at the same time.

3.2.1 Using the Mouse in Live View

Table 1-9 Mouse Operation in Live View
Name Description
Menu Enter the main menu of the system by right clicking the mouse.
Single Screen Switch to the single full screen by choosing channel number from the drop-down list.
Multi-Screen Adjust the screen layout by selecting from the drop-down list.
Previous Screen Switch to the previous screen.
Next Screen Switch to the next screen.
Start/Stop Enable/disable the auto-switch of the screens.
Auto-Switch
The
Start Recording Start recording of all channels, Continuous Record and Motion Detection Record are selectable
from the drop-down list.
Add IP Camera A shortcut to enter the IP camera management interface.(For HDVR series only)
Playback Enter the playback interface and start playing back the video of the selected channel
immediately.
PTZ Control A shortcut to enter the PTZ control interface of the selected camera.
Output Mode Output Mode is configurable with Standard, Bright, Gentle and Vivid options.
Aux Monitor Switch to the auxiliary output mode and the operation for the main output is disabled.
If you enter Aux monitor mode and the Aux monitor is not connected, the mouse operation is
disabled. You need to switch back to the Main output with the F1 button on front panel or
VOIP/MON button on IR remote control and then press Enter.
UM DS-720xHTI-Kx 012918NA
Main Output Auxiliary Output For Live View Output Only
VGA
CVBS
CVBS
dwell time
of the live view configuration must be set before using Start Auto-Switch.
Figure 3-1 Right-Click Menu
CVBS
VGA
HDMI
33