Front Panel - HIKVISION DS-9100HFI-ST Series User Manual

User Manual of DS-9100HFI-ST Series DVR

1.1 Front Panel

The front panel of DS-9100HFI-ST is shown in Figure 1.1.
No. Name
ALARM
READY
STATUS
HDD
1
MODEM
TX/RX
GUARD
2
IR Receiver
3
Front Panel Lock
4
DVD-ROM
5
Alphanumeric Buttons
6
USB Interfaces
7 ESC
Figure 1.1 Front Panel
Table 1.1 Description of Control Panel Buttons
Function Description
Alarm indicator turns red when a sensor alarm is detected.
Ready indicator is normally green, indicating that the DVR is functioning
properly.
Status indicator turns green when DVR is controlled by an IR remote.
Indicator turns red when controlled by a keyboard and purple when IR
remote and keyboard is used at the same time.
HDD indicator blinks red when data is being read from or written to HDD.
Reserved for future usage.
TX/RX indictor blinks green when network connection is functioning
properly.
Guard indicator turns green when the device is in armed status; at this
time, an alarm is enabled when an event is detected. The indicator turns
off when the device is unarmed. The arm/disarm status can be changed by
pressing and holding on the ESC button for more than 3 seconds in live
view mode.
Receiver for IR remote
You can lock or unlock the panel by the key.
Slot for DVD-ROM. (Optional)
•
Switching to the corresponding channel in Live view or PTZ Control
mode.
•
Inputting numbers and characters in Edit mode.
•
Switching between different channels in Playback mode.
•
The light of the button is green when the corresponding channel is
recording; it is red when the channel is in network transmission status; it is
pink when the channel is recording and transmitting.
Universal Serial Bus (USB) ports for additional devices such as USB
mouse and USB Hard Disk Drive (HDD).
Back to the previous menu
Pressing for arming/disarming the DVR in Live View mode.
14