Configuring Snmp - HIKVISION DS-9100HFI-ST Series User Manual

User Manual of DS-9100HFI-ST Series DVR
Directory: In the Directory field, you can select the Root Directory, Parent directory and secondary
directory. When the Parent Directory is selected, you have the option to use the Device Name,
Device No or Device IP for the name of the directory; and the when the Secondary Directory is
selected, you can use the Camera Name or Camera No. as the name of the directory.
5. Click the Apply button to save and exit the interface.
Note: Please make sure the remote FTP server has been started up before setting the FTP parameters.

9.2.5 Configuring SNMP

Purpose:
You can use SNMP protocol to get device status and parameters related information.
Steps:
1. Enter the Network Settings interface.
Menu > Configuration > Network
2. Select the SNMP tab to enter the SNMP Settings interface, as shown in Figure 9.15.
Figure 9.14 Configure FTP Settings
Figure 9.15 SNMP Settings Interface
144