Using The Mouse In Live View - HIKVISION DS-7208HUHI-K1S User Manual

S.N
1
2
3
 √ means the interface is in use, × means the interface is out of use or the connection is
invalid. And the HDMI, VGA and CVBS can be used at the same time.
 For DS-7300/8100/9000HUHI-F/N series, when CVBS is used as the main output, the
VGA/HDMI1 and HDMI2 interfaces can only output the live view.

3.2.1 Using the Mouse in Live View

You can refer to Table 3-4 for the description of mouse operation in live view mode.
Name
Menu
Single Screen
Multi-Screen
Previous
Screen
Next Screen
Start/Stop
Auto-Switch
Start
Recording
Digital Video Recorder User Manual
Table 3-3 Priorities of Interfaces for Other Series
VGA/HDMI CVBS
√ √
√ ×
× √
Table 3-4 Mouse Operation in Live View
Description
Enter the main menu of the system by right clicking the
mouse.
Switch to the single full screen by choosing channel number
from the dropdown list.
Adjust the screen layout by selecting from the dropdown list.
For DS-7300/8100/9000HUHI-F/N series DVR, if the sum of the
analog and IP channels exceeds 25, up to 32-window division
mode is supported for the VGA/HDMI1 output.
Switch to the previous screen.
Switch to the next screen.
Enable/disable the auto-switch of the screens.
The dwell time of the live view configuration must be set
before using Start Auto-Switch.
Start recording of all channels, Continuous Record and
Motion Detection Record are selectable from the dropdown
Main Auxiliary
output output
VGA/HDMI CVBS
VGA/HDMI
CVBS
72