HIKVISION DS-9100HFI-ST Series User Manual page 85

User Manual of DS-9100HFI-ST Series DVR
Steps:
1. Enter the playback interface.
Menu>Playback
2. Select Event tab to enter the Event Playback interface.
3. Select Alarm Input as the event type.
4. Click Search button to enter the Search Result interface.
If you want to play back recorded files associated with motion detection, choose Motion as event type
and click Search button to enter the Search Result interface.
5. Click button to enter the Playback interface.
If there is only one channel is triggered by an alarm input, pressing
Playback interface of this channel.
If several channels are triggered, pressing
Note: Pre-play and post-play can be configured.
Figure 6.15 Video Search by Alarm Input
Figure 6.16 Video Search by Motion
button takes you to step 7 and then step 8.
84
button takes you to Full-screen