Rear Panel - HIKVISION DS-9100HFI-ST Series User Manual

User Manual of DS-9100HFI-ST Series DVR

1.5 Rear Panel

Table 1.5 Description of DS-9100HFI-ST Rear Panel
No. Item
1 VIDEO IN
2 LOOP OUT
3 VIDEO SPOT OUT
4 VIDEO OUT
5 AUDIO OUT
6 LINE IN
7 AUDIO IN
8 AUDIO IN
9 RS-232 Interface
10 VGA
11 HDMI
12 eSATA (Optional)
13 LAN Interface
14 Termination Switch
RS-485 Interface
15
Controller Port
ALARM IN
ALARM OUT
16 GROUND
17 AC 100V ~ 240V
18 POWER
Description
BNC connector for analog video input.
BNC connector for video loop output.
BNC connector for video output.
BNC connector for video output.
1. When both HDMI and VGA are connected, it is used for live view
only;
2. When either HDMI or VGA is connected, it is used as the spot video
output for live view, playback, recording and PTZ controls;
3. When neither HDMI nor VGA is connected, it is used as the main
video output for live view and menu operations.
RCA connector for audio output. This connector is synchronized with
VIDEO OUT.
RCA connector for audio input.
RCA connector for audio input.
DB26 connector for audio input.
Connector for RS-232 devices.
DB9 connector for VGA output. Display local video output and menu.
HDMI video output connector.
Connects external SATA HDD, CD/DVD-RM.
Connector for LAN (Local Area Network).
RS-485 termination switch.
Up position is not terminated.
Down position is terminated with 120Ω resistance.
Connector for RS-485 devices. T+ and T- pins connects to R+ and R-
pins of PTZ receiver respectively.
D+, D- pin connects to Ta, Tb pin of controller. For cascading devices,
the first DVR's D+, D- pin should be connected with the D+, D- pin of
the next DVR.
Connector for alarm input.
Connector for alarm output.
Ground (needs to be connected when DVR starts up).
AC 100V ~ 240V power supply.
Switch for turning on/off the device.
20