HIKVISION DS-9100HFI-ST Series User Manual page 193

User Manual of DS-9100HFI-ST Series DVR
3. Enter the information for new user, including User Name, Password, Level and User's MAC Address.
Level: Set the user level to Operator or Guest. Different user levels have different operating permission.
•
Operator: The Operator user level has permission of Two-way Audio in Remote Configuration and
all operating permission in Camera Configuration.
•
Guest: The Guest user has no permission of Two-way Audio in Remote Configuration and only has
the local/remote playback in the Camera Configuration.
•
User's MAC Address: The MAC address of the remote PC which logs onto the DVR. If it is
configured and enabled, it only allows the remote user with this MAC address to access the DVR.
4. Click the OK button to save the settings and go back to the User Management interface. The added new
user will be displayed on the list, as shown in Figure 13.6.
Figure 13.6 Added User Listed in User Management Interface
5. Select the user from the list and then click the
shown in Figure 13.7.
6. Set the operating permission of Local Configuration, Remote Configuration and Camera Configuration for
Figure 13.7 User Permission Settings Interface
192
button to enter the Permission settings interface, as