Table of Contents
Advertisement
Line-Dropped Period
Line-Dropped
Scheduling
Link Backup Interface
Shared- Circuit WAN
environment
MTU
After the changes are completed, click "Apply" to save the configuration, or click "Cancel" to leave without
making any changes.
PPPoE
This option is for an ADSL virtual dial-up connection (suitable for ADSL PPPoE). Input the user connection
name and password issued by ISP. Then use the PPP Over-Ethernet software built into the device to connect
with the Internet. If the PC has been installed with the PPPoE dialing software provided by ISP, remove it. This
software will no longer be used for network connection.
Input the time rule for the disconnection of this WAN service.
Input how long the WAN service may be disconnected before the newly added
connections should go through another WAN to connect with the Internet.
Select another WAN port as link backup when port binding is configured. Users
should select the port that employs the same ISP.
If your WAN connects to a Switch, select "Enabled" to filter broadcast packets.
The default is "Disabled".
MTU is abbreviation of Maximum Transmission Unit. "Auto" and "Manual" can
be chosen. The default value is 1500. Different value could be set in different
network environment. (e.g. ADSL PPPoE MTU: 1492) The default is "Auto".
Gigabit Content Security Router User's Manual
- 28 -
Advertisement
Table of Contents
