Table of Contents
Advertisement
for Netcom and Telecom can be divided.
Set WAN Grouping
If more than one WAN is connected with Netcom, to apply a similar division of traffic policy to these WANs, a
combination for the WANs must be made. Click "Set WAN Grouping"; an interactive window as shown in the
figure below will be displayed.
Item
Name
Interface
Add To List
Delete selected Item
Apply
Close
After the configuration is completed, in the China Netcom Policy window users can select WANs in
combination to connect with Netcom.
Description
To define a name for the WAN grouping in the box, such as "Education" etc.
The name is for recognizing different WAN groups.
Check the boxes for the WANs to be added into this combination.
To add a WAN group to the grouping list.
To remove selected WANs from the WAN grouping.
Click "Apply" to save the modification.
Click "Cancel" to cancel the modification. This only works before "Apply" is
clicked.
Gigabit Content Security Router User's Manual
- 42 -
Advertisement
Table of Contents
