Table of Contents
Advertisement
Item
Service
Source IP
Destination IP
Description
This is to select the Binding Service Port to be activated. The default (such as
ALL-TCP&UDP 0~65535, WWW 80~80, FTP 21 to 21, etc.) can be selected
from the pull-down option list. The default Service is All 0~65535.
Option List for Service Management: Click the button to enter the Service Port
configuration page to add or remove default Service Ports on the option list.
Users can assign packets of specific Intranet virtual IP to go through a specific
WAN port for external connection. In the boxes here, input the Intranet virtual IP
address range; for example, if 192.168.1.100~150 is input, the binding range
will be 100~150. If only specific Service Ports need to be designated, while
specific IP designation is not necessary, input "0" in the IP boxes.
In the boxes, input an external static IP address. For example, if connections to
destination IP address 210.11.1.1 are to be restricted to WAN1, the external
static IP address 210.1.1.1 ~ 210.1.1.1 should be input. If a range of
destinations is to be assigned, input the range such as 210.11.1.1 ~
210.11.255.254. This means the Class B Network Segment of 210.11.x.x will
Gigabit Content Security Router User's Manual
- 51 -
Advertisement
Table of Contents
